What is the working principle and function of the multi-way valve?
Release time:
2024-09-29 11:46
The working principle of the multi-way valve can be simply summarized as follows: the relative movement of the valve core to the valve body is used to turn on, turn off or change the direction of the oil flow in the oil circuit, so as to realize the start, stop or change the movement direction of the hydraulic actuator and its driving mechanism.
The maximum working pressure of the multi-way valve is 420bar, and the maximum flow rate of the single piece is 380l/min. It adopts a unified modular design as a whole, which can provide reliable system solutions for the manufacturers of engineering vehicles. The user needs to make different combinations of the valve body according to the functional requirements, which is simple and reliable.
Previous Page
Related News
What are the hazards of internal leakage of multi-way valves?
When the internal leakage of the multi-way valve occurs, the hydraulic oil leaks from the high-pressure chamber to the low-pressure chamber, so that the effective flow of the supply components (such as hydraulic cylinders or hydraulic motors) is reduced.
How to solve the problem of internal leakage of multi-way valve?
Seal inspection: first of all, the multi-way valve needs to be disassembled and the internal seals are carefully inspected. The seal may be a rubber seal, a combination seal, etc.
What is the working principle and function of the multi-way valve?
Use the relative movement of the valve core to the valve body to turn on, turn off or change the direction of the oil flow
Introduction to the principle and working principle of hydraulic lock
The hydraulic lock uses the pressure of the hydraulic oil to lock the moving parts in a set position through the lock core to play a protective role.
What are the good or bad detection methods of hydraulic lock?
The quality of hydraulic lock can be tested by static test and dynamic test.
Recommend products
Hydraulic Pilot Valve R220-9 Joystick 220LC-9S Excavator New Condition Lever Pilot Control
Directional Control Valve Series
DCV60 Air-Piloted Solenoid Sectional Sanitation Vehicle Excavator Directional Control Valve
Directional Control Valve Series
Pressure Compensation Manual Electro-Hydraulic Control psv/psl3 sectional hydraulic valve
Directional Control Valve Series
SD series Monoblock Electric-hydraulic Directional Hydraulic Control Valve 60L
Directional Control Valve Series
Contact Us
Address: No.27 Zongyan Road,Xikou Industrial Zone,Fenghua,Ningbo,China
Telephone: 86-574-88845188
E-mail:sales001@nbbolev.com
Tiktok